The Mueller single- and multiple-effect stills utilize proven natural circulation evaporator technology in a range of 20 sizes to produce from 50 to 3,000 gallons per hour of water-for-injecton. This technology minimizes the potential for corrosion and provides for a simple, reliable method of operation which minimizes the need for control equipment and maintenance required. In addition, when inspection or maintenance is required the components are readily accessible with no need to remove or disassemble any of the major components to access critical areas. Distillate is produced near the top of the equipment which facilitates filling of WFI storage equipment.

Each unit produced at the Springfield, Missouri, facility is thoroughly tested prior to shipment, challenging all alarm conditions and operating scenarios so you can be assured that the still will reliably produce pyrogen-free water. This testing includes LAL

Included with each unit:

Feedwater conductivity measurement
Product temperature and conductivity measurement
Chart recorder to create a permanent record of feedwater and product conductivity
Distillate divert valves and purge cycle
Level monitoring and control for each effect
Temperature monitoring for each effect
Allen Bradley PLC and operator interface terminal (OIT)
Hot standby mode to minimize startup time
Startup services utilizing a factory-based service technician
Full Factory Acceptance Testing (FAT)

Also available with each unit:

Pure Steam productivity capability
Feedwater pump included within equipment frame
Elevated condenser to ensure gravity flow into WFI storage tank
Choice of many control platforms including:

Allen Bradley SLC 500 Series
Allen Bradley Control Logix
Allen Bradley PLC 5
Mitsubishi
Siemens S5

Please refer to this link for a form indicating the required information for sizing multiple-effect stills and pure steam generators. Please complete and submit and someone from the BioPharm Systems department will contact you.

Privacy Policy