Model "SH" Tanks Mueller Model "SH" tanks are a series of cylindrical, horizontal storage containers. These tanks are especially suited for bulkhead installation, as all product connections are located on the front head. Tanks are built to 3A sanitary standards and can be equipped to meet your specific needs for liquid product storage. - Durable Type 304 stainless steel inner liner polished to a No. 4 sanitary finish.
- Prime-painted carbon steel outer jacket.
- Removable, 2-inch stainless steel inlet with special "no-foam" design.
- Removable, 3-inch perforated air vent protects tank structure from vacuum.
- Ladder with a platform for access to inlet and vent.
- A 16- by 20-inch insulated, stainless steel manway door with sampling valve.
- Stainless steel front head with 10-inch cylinder band (recommended for bulkheading) or stainless steel jacket and legs.
- Vertical, mechanical agitation system.
- Two-inch rigid insulation.
- Adjustable carbon steel legs with concealed threads.
- Lifting lugs.
- Dial thermometer with well.
- Three-inch, clamp-type outlet ferrule is standard.
- CIP door and spray devices for automated cleaning.
Optional Features - Mueller Temp-Plate heat transfer surface for precise temperature control (Model "SHW").
- Painted exterior finish for protection and enhanced appearance.
- Liquid level gauge connection for continuous monitoring.
- Recording thermometer well for temperature tracking.
- Refrigeration controls for chilled water, R-22, or ammonia refrigerant systems.
- Combination sight and light glass with handy light fixture.
Model "OE" Tanks  The all stainless steel Mueller Model "OE" is an economical, elliptical-shaped cooling and storage tank with many applications in the field of food processing. Its low height-to-volume ratio combines space efficiency with ease of cleaning and maintenance. - Cooler-mounted wash system with piping and spray dishes.
- 5,000-8,000 gallon sizes have 1-1/2" external wash line.
- Positive manway wash.
- Stainless steel inner liner and exterior.
- Sweat copper connections on all coolers.
- Foam-in-place urethane insulation.
- Complete agitator assembly.
- 18" diameter manway opening with hinged cover, gasket, and clamp.
- Remote, wall-mounted control cabinet with controls.
- Spray dishes and external wash piping standard on 5,000-8,000 gallon coolers.
- Stainless steel external ladder on 800 gallon and larger coolers.
- Portable aluminum ladder on 2,700 gallon and larger coolers for internal access.
- Stainless steel calibration stick for 500-1,600 gallon coolers.
- Milk inlet/air vent combination is located in a 3" opening in the manhole cover. A rubber adapter is furnished to receive a 1-1/2" stainless steel milk pipeline.
- Two-inch stainless steel, disc-type, clamp-on external outlet valve. 3" outlet valve standard on 4,000- 8,000 gallon coolers.
- Dial-type milk thermometer mounted in outlet valve head of cooler.
- External liquid level gauge on 2,000-8,000 gallon coolers.
Optional Features - Control and pump assembly.
- Refrigeration packages available.
- Pre-assembled refrigerant tubing.
Multi-Compartment Tanks  Mueller single- and multi-compartment tanks are designed to provide storage and thorough mixing of most viscous food processing liquids. Their use results in optimum utilization of floor space. The tanks are available in three models: "HM" with a hinged cover, and "SOM" and "SRM" with a solid top and manway. Both solid top models have pitched tops for water drainage. - Standard Type 304 stainless steel construction with both interior and exterior surfaces polished to a No. 4 finish.
- Units available with one, two, three, or four compartments. Insulated adjacent compartments can be used with extreme temperature variations without appreciable heat transfer.
- Stainless steel agitator shield to prevent contaminants from entering the tank.
- Bottoms are pitched to an industry standard.
- Two-inch, clamp-type outlet ferrule for easy, complete drainage and connection compatibility.
- 1-1/2 inch rigid insulation on each side of each compartment.
Optional Features - Mueller Temp-Plate heat transfer surfaces are designed for use with a variety of cooling/heating media, available on any or all compartments of each tank.
- A calibration rod is available to measure the contents of each compartment.
- Two-inch stainless steel outlet valves.
|
