Paul Mueller Company

3 x 5 Falling Film Chiller 

Paul Mueller Company's 3 x 5 falling film chillers reduce chilling time, increase production, and bring a faster return on your investment. This product is easy to clean and inspect with virtually no downtime for maintenance.

The design of Mueller® Temp-Plate® inflated heat transfer surface inside this chiller eliminates potential chiller freeze up and accepts incoming fluid temperatures in excess of 80 degrees F, getting rid of the need for a secondary heat exchanger. And the fully enclosed design puts an end to product contamination.

The 3 x 5 chiller is available in an 8-plate cabinet, with a  tank properly sized to satisfy the requirements for optimum efficiency. Distribution pans are available with extra-low, low and high flow rates, based on chilled water usage.

 

Features

  • Fully-enclosed design puts an end to product contamination
  • Easy to clean and inspect with virtually no downtime for maintenance
  • The design of Mueller Temp-Plate® inflated heat transfer surface eliminates potential chiller freeze up
  • Accepts incoming fluid temperatures in excess of 80° F without the need for a secondary heat exchanger
  • Extra-low flow rates range from 4 to 10 gpm, low flow rates range from 8 to 15 gpm and high flow rates range from 16 to 30 gpm (per evaporator)

Specifications and Sizing

3 x 5 Falling Film Chillers

Cabinet
Size
No. of Plates Dimensions
L x W x H
( in / cm )
Maximum
Shipping
Weight
( lb / kg )
Tank
Capacity
( gallon / liter )
N 2-8 68.5 x 39.175 x 77.75 / 174 x 99.5 x 194.5 1,520 / 689.4 173 / 654.9
O 2-8 68.5 x 39.175 x 99.25 / 174 x 99.5 x 252.1 1,720 / 780.2 365 / 1,381.7

Note: Maximum weight is based on the maximum number of plates a chiller will hold.