4 x 8 Falling Film Chiller

Paul Mueller Company's 4 x 8 falling film chillers reduce chilling time, increase production, and bring a faster return on your investment. This product is easy to clean and inspect with virtually no downtime for maintenance. The design of Mueller Temp-Plate® inflated heat transfer surface inside this chiller eliminates potential chiller freeze up and accepts incoming fluid temperatures in excess of 80 degrees F, getting rid of the need for a secondary heat exchanger. And the fully enclosed design puts an end to product contamination.

The 4 x 8 chiller is available in an 8-, 16-, 24-, and 32-plate
cabinet. Each of these chillers has a tank properly sized to satisfy the requirements of the chiller.

Distribution pans are available with extra-low, low and high flow rates, based on chilled water usage.

 

Features

  • Fully-enclosed design puts an end to product contamination
  • Easy to clean and inspect with virtually no downtime for maintenance
  • The design of Mueller Temp-Plate® inflated heat transfer surface eliminates potential chiller freeze up
  • Accepts incoming fluid temperatures in excess of 80° F, without the need for a secondary heat exchanger
  • With a 4 x 8, extra-low flow rates range from 6 to 16 gpm, low flow rates range from 13 to 24 gpm, and high flow rates range from 25 to 48 gpm (per evaporator)

Specifications and Sizing

4 x 8 Falling Film Chillers

Cabinet
Size
No. of Plates Dimensions
L x W x H
( in / cm )
Maximum
Shipping
Weight
( lb / kg )
Tank
Capacity
( gallon / liter )
J 2-8 104.5 x 39.125 x 90.75 / 265.4 x 99.4 x 230.5 2,735 / 1,240.6 293 / 1,109.1
K 2-16 104.5 x 72.375 x 90.75 / 265.4 x 183.8 x 230.5 5,220 / 2,367.8 525 / 1,987.3
L 2-24 104.5 x 105.875 x 90.75 / 265.4 x 268.9 x 230.5 7,705 / 3,495 750 / 2,839.1
M 2-32 104.5 x 139 x 90.75 / 265.4 x 353.1 x 230.5 10,190 / 4,622.1 1,113 / 4,213.2
Note: Maximum weight is based on the maximum number of plates a chiller will hold.